Asus M4A78-E - Motherboard - ATX User Manual page 112

Creating a RAID
To create a RAID 0 set
In the Main Menu, press <2> to enter the Define LD function.
1.
2. Press <Enter>, and the following screen appears.
Option ROM Utility (c) 2008 Advanced Micro Devices, Inc.
LD No RAID Mode Total Drv
LD 1 RAID 0 0
Strip Block: 64 KB
Gigabyte Boundary: ON
Channel:ID Drive Model Capabilities Capacity(GB) Assigment
1:Mas ST3160812AS SATA 3G 160.04 N
2:Mas ST3160812AS SATA 3G 160.04 N
3:Mas ST3160812AS SATA 3G 160.04 N
4:Mas ST3160812AS SATA 3G 160.04 N
[↑] Up [↓] Down [ESC] Exit [Space] Change [Ctrl-Y] Save [PgUp/Dn] Page Change
Use the Up/Down arrow key to highlight the LD1 item and press <Space> to select a
3.
RAID set you would like to create.
Move to the Assignment item by using the down arrow key and press <Space> to set
4.
Y to the drives you would like to include in the RAID set.
5. Press <Ctrl> + <Y> to save the setting. The utility prompts the following messages:
Fast Initialization Option has been selected
It will erase the MBR data of the disks.
<Press Ctrl-Y Key if you are sure to erase it>
<Press any other key to ignore this option>
To continue, press <Ctrl> + <Y> to erase MBR and all data on the selected drives.
To cancel, press any other key to ignore this option. The utility prompts the following
messages:
Press Ctrl-Y to Modify Array Capacity or press any
other key to use maximum capacity...
Press <Ctrl> + <Y> to key in the desired capacity, or press any other key to use the <Ctrl> + <Y> to key in the desired capacity, or press any other key to use the
maximum capacity.
6. The utility displays the following screen on the next page.
4-16
[ Define LD Menu ]
Fast Init: ON
Cache Mode: WriteThru
[ Drives Assignments ]
[ Keys Available ]
to key in the desired capacity, or press any other key to use the
Chapter 4: Software support