Table of Contents
Advertisement
Mini-monitor Commands
The following commands relate to the Mini-monitor. They are all case sensitive.
Your Eicon Technology Customer Services representative may ask you to use these commands.
at@dump
at@d1
at@d2
at@d3
at@d4
at@fail
at@load
at@md arg
at@msg
at@quit
at>F
Dump Memory. Produces a memory dump using XMODEM.
Note: This command needs a terminal emulation program that supports XMODEM.
DRAM test.
Flash test.
ISDN internal loop back test.
ISDN external loop back test.
Simulate a fault.
Load New Firmware.
Note: This command needs a terminal emulation program that supports XMODEM or
1K-XMODEM.
Display memory (arg= "address:size").
Display cause for entering the monitor.
Exit the Mini-monitor.
Restore All Profiles to Original Factory Settings. Reverts the powerup profile to
number 0.
Warning: All previous user-defined settings are lost.
DIVA T/A ISDN Modem Reference Guide N Page 62
Advertisement
Table of Contents
Need help?
Do you have a question about the DIVA T/A ISDN Modem and is the answer not in the manual?