Table of Contents
Advertisement
AT$VX
Start an AO/DI X.25 Trace.
You can specify the total size of the trace buffer and the length of the each trace entry.
Use the following syntax:
AT$VX [trace size, entry length], where trace size and entry length are specified in
hexadecimal values.
For example, to specify a trace size of 32K and an entry length of 256 bytes, enter: AT$VX
8000, 100.
If you do not specify trace size and length, the default values are used. The default trace
size is 16K, the default entry length is 128 bytes.
AT$Y
Enter the monitor on the next reset.
AT$Z
Soft reset the unit and enter the monitor.
DIVA T/A ISDN Modem Reference Guide N Page 56
Utility Commands
Advertisement
Table of Contents
Need help?
Do you have a question about the DIVA T/A ISDN Modem and is the answer not in the manual?