®
M3A32-MVP DELUXE IDE connector
3.
AMD
SB600 Southbridge Serial ATA connectors
®
(7-pin SATA1 [red]; SATA2 [black]; SATA3 [red]; SATA4 [black])
These connectors are for the Serial ATA signal cables for Serial ATA hard disk
and optical disk drives.
If you install SATA hard disk drives to the SATA1/2/3/4 connectors, you can
create a RAID 0, RAID 1, or RAID 0+1 configuration through the onboard
AMD
SB600 controller.
®
•
These connectors are set to [IDE] by default. If you intend to create a Serial
ATA RAID set using these connectors, set the Onchip SATA Type item in
the BIOS to [RAID]. See section 4.3.6 Storage Configuration for details.
Before creating a RAID set, refer to 5.4 RAID Configurations or the
•
manual bundled in the motherboard support DVD.
®
M3A32-MVP DELUXE
SATA connectors
ASUS M3A32-MVP Deluxe Series
PRI_IDE
NOTE: Orient the red markings
(usually zigzag) on the IDE
ribbon cable to PIN 1.
SATA3
SATA4
SATA1
SATA2
2-29