Asus M3A32-MVP - Deluxe Motherboard - ATX User Manual page 153

Creating a RAID 0+1 configuration
To create a RAID 0+1 set:
1. In the Main Menu, press <2> to enter the "Define LD" function.
2. Press <Enter>, and the following screen appears.
FastBuild (tm) Utility (c) 2004-2005 ATI Technology, Inc.
LD No RAID Mode
LD 1
Strip Block:
Gigabyte Boundary: ON
Channel:ID Drive Model
Assignment
1:Mas xxxxxxxxx
2:Mas xxxxxxxxx
3:Mas xxxxxxxxx
4:Mas xxxxxxxxx
[↑]Up [↓]Down
Highlight the LD1 item and press <Space> to select RAID 10.
3.
Move to the Assignment item by using the down arrow key and set Y to any
4.
four of the drives.
5. Press <Ctrl+Y> to save the setting. The utility prompts the following
messages:
Press Ctrl-Y if you are sure to erase MBR! Press any other
key to ignore this option...
Press <Ctrl+Y> to erase MBR or press any key to continue.
Press Ctrl-Y to Modify Array Capacity or press any other key
to use maxinum capacity...
Press <Ctrl+Y> to key in the desired capacity or press any key to continue.
6. The utility displays the following screen.
FastBuild (tm) Utility (c) 2004-2005 ATI Technology, Inc.
LD No RAID Mode
LD 1 RAID 10
LD 2 ----
LD 3 ----
LD 4 ----
LD 5 ----
LD 6 ----
LD 7 ----
LD 8 ----
[↑]Up [↓]Down
ASUS M3A32-MVP Deluxe Series
[ Define LD Menu ]
Total Drv
RAID 10 4
64 KB Fast Init:
Cache Mode: WriteThru
[ Define LD Menu ]
xxxxxx
xxxxxx
xxxxxx
xxxxxx
[ Keys Available ]
[ESC]Exit [Space] Change Option
[ Define LD Menu ]
Total Drv Capacity(MB)
4
----
----
----
----
----
----
----
[ Keys Available ]
[ESC]Exit [Enter] Select
OFF
Capacity (MB)
Y
Y
Y
Y
[Ctrl-Y]Save
Status
xxxxxx Functional
---- ----
---- ----
---- ----
---- ----
---- ----
---- ----
---- ----
5-41