Removing An Optical Disc (Without Power) - HP Compaq NC8230 Hardware Manual

Multimedia hardware

Removing an optical disc (without power)

If external or battery power is not available:
1. Insert the end of a paper clip 1 into the release access on the
front bezel of the drive.
2. Press in gently until the tray is released, and then pull out
the tray 2.
3. Remove the disc 3 from the tray by gently pressing down on
the spindle while lifting the outer edges of the disc. Hold the
disk by the edges and avoid touching the flat surfaces.
✎
4. Close the media tray and place the disc in a protective case.
1–4
If the tray is not fully accessible, tilt the disc carefully as you
remove it.
Multimedia