Removing An Optical Disc (Without Power) - HP Compaq Presario,Presario C500 User Manual

Removing an optical disc (without power)

If external or battery power is unavailable:
1. Insert the end of a paper clip (1) into the release access in the front bezel of the drive.
2. Press in gently until the tray is released, and then pull out the tray (2).
3. Remove the disc (3) from the tray by gently pressing down on the spindle while lifting the outer
edges of the disc. Hold the disk by the edges and avoid touching the flat surfaces.
NOTE
4. Close the media tray and place the disc in a protective case.
44 Chapter 4 Drives
If the tray is not fully accessible, tilt the disc carefully as you remove it.
ENWW