Power Adaptor - Nextar X3-08 User Manual

Power Adaptor

Using the Power Adaptor
The GPS unit is supplied with a
powering the unit while in a vehicle.
Connect the DC Adaptor
the vehicle's 5V accessory/ cigarette socket, as shown below.
Attention
 Set up your destination and other settings before moving out into traffic.
Do not access the controls of the GPS unit while driving.
 Mount the unit so that it does not obstruct your view of the road.
 When connected with adaptor, the LCD screen will be brighter than when it's not
charging.
About Rechargeable Battery
Your portable GPS device comes with a built-in rechargeable Lithium-Ion battery. A fully
charged battery delivers about 2 hours of use. It is recommended to use the
while in the vehicle.
Working conditions and precautions for the rechargeable battery
 Battery should only be used and charged when temperatures are between
32-100F.
 Maintain well-ventilated conditions around the product to avoid overheating. Do not
put the product on a blanket, clothing or anything that may block ventilation to the
product.
 When the battery is weak, an indication symbol will appear on the LCD screen and
the unit will power off automatically after a few minutes.
DC Adaptor
Power Plug to the unit's power jack and plug the other end to
for charging the internal battery and for
7
DC Adaptor