Dial Cgcles - GE GSD4000NBB - Full Console Dishwasher Owner's Manual

Operation of models with cycle dial ge.com
Off 0 LNIt/vqs_
O[_te Wermer _
Rinse Only
For rinsing partial loads that will be washed later Do not use detergent.
Make sure HEATED DRY is not sele_ed. Slowly turn t he Dial toRINSE ONLY.
Be s ure the d oor is unlatched, atch the door tostart the cycle,
_t Stl,r_
o# o woh
[l_otod D_j of
Plate Warmer or Drying
Forwarming clean dishes and serving plates.This cycle will take approximately 39 minutes.
Load clean dishware to be warmed. _ Slowly turn the Dial to PLATEWARMERor
Select HEATEDDRY ON. , DRYING.
Be sure the door is unlatched. Latch the door to start the cycle,
Hot Start or Hot Prestart Option
Preheatswash water to the correct temperature.
Select the HOTSTART or HOTPRESTART
cyc e and any other option on the push
button pad,
Be sure the door is unlatched,
Slowly turn the Dial to HOT STARTor
HOT PRESTART.
Latch the door to start the cycle.
Hotst_ll
i st_l__, _g _1. *_ '_
P_ wo_m_ _ ,!i)¸:
F_,,_ _
Short Wash or Light Wash or Water Saver
For quickly washing loads of everyday dishes with light to medium soils that have not dried on.
Be sure the door is unlatched. Latch the door to start the cycle.
Slowly turn the Dial to SHORTWASH,
..... _-'_LIGHTWASH or WATER SAVER.
i;¸¸¸¸
Q 0 Li r _£ges _
Start Delay ton some models)
The START DELAYwill allow you to delay the start time of any cycle automatically up to 6 hours.
Be sure t he door isunlatched. _ Slowly turn the Dial tothe desired time.
CYCLE ON light will come on,
Select the wash cycle and option you want. _ Latch the door to start the cycle.
Start (Hodels with a Dial)
Slowly turn the Dial to the START or ON position, or the selected cycle. Don't turn it past the START,
ON or cycle position; you could accidentally miss a prewash.
There is a time delay between start-up and water fill so you will not hear any wash action right
away_
Latch the door to begin the cycle.