Dial Cycles - GE GSC3500 Owner's Manual

Operation of models with cycle dial
Plate Warmer
For warming clean dishes and serving plates. This cycle will take approximately 39 minutes.
Hot Start
Preheats wash water prior to the NORMAL or POTS & PANS cycle.
Start
For NORMAL or POTS & PANS cycles selected by push button.
There is a time delay between start-up and water fill so you will not hear any wash action
right away.
6
Rinse Only
For rinsing partial loads that will be washed later. Do not use detergent.
Make sure HEATED DRY is not selected.
1
Be sure the door is unlatched.
2
Load clean dishware to be warmed.
1
Select HEATED DRY ON.
2
Be sure the door is unlatched.
3
Be sure the door is unlatched.
1
Press the NORMAL pad or the
2
POTS & PANS pad.
Light Wash
For quickly washing loads of everyday dishes with light to medium soils that have not dried on.
Be sure the door is unlatched.
1
Slowly turn the Dial to LIGHT WASH.
2
Be sure the door is unlatched.
1
Press the NORMAL pad or the
2
POTS & PANS pad.
Slowly turn the Dial to RINSE ONLY.
3
Latch the door to start the cycle.
4
Slowly turn the Dial to PLATE WARMER.
4
Latch the door to start the cycle.
5
Slowly turn the Dial to HOT START.
3
Latch the door to start the cycle.
4
Press the NORMAL pad.
3
Latch the door to start the cycle.
4
Slowly turn the Dial to START.
3
Latch the door to start the cycle.
4