Panoramas
If you have installed the supplied computer software (ib), you can use it to join
pictures together to form a panorama. g "Installing the supplied computer
software (ib)" (P. 88)
Taking pictures for a panorama
1
Rotate the mode dial to SCN.
2
Select [PANORAMA] and press i.
3
Use FGHI to choose a pan direction.
4
Take a picture, using the guides to frame
the shot.
•
Focus, exposure, and other settings are fixed at the values for the first shot.
5
Take the remaining images, framing each shot so that the guides
overlap with the previous picture.
250 F5.6
250
M
M
A panorama may include up to 10 images. A warning indicator ( g ) is displayed
•
after the tenth shot.
6
After taking the last shot, press i to end the series.
#
Caution
•
During panorama shooting, the image previously taken for position alignment will
not be retained. With the frames or other markers for display in the images as a
guide, set the composition such that the edges of the overlapping images overlap
within the frames.
$
Notes
Pressing the i button before shooting the first frame returns to the scene mode
•
selection menu. Pressing the i button in the midst of shooting ends the sequence
of panorama shooting, and allows you to continue with the next one.
38 38
[ 2 ]
250 F5.6
250
M
EXIT
EXIT
1
38 38
EXIT
EXIT
[ 3 ]
EN