•
Images recorded in RAW data cannot be printed.
•
You cannot print movie images.
•
The camera will not enter sleep mode while it is connected to the USB cable.
Connecting the camera to a printer
Use the provided USB cable to connect the camera to a PictBridge-compatible
printer.
1
Turn the printer on and connect the camera's multi-connector to
the printer's USB port with the USB cable.
•
For details on how to turn the printer on and the position of the USB port, refer
to the printer's manual.
2
Turn on the camera.
•
The selection screen for the USB connection is displayed.
3
Use FG to select [PRINT].
8
•
[ONE MOMENT] is displayed and the camera and
printer are connected. Go to "Custom printing" (P. 85).
#
Caution
•
If the screen is not displayed after a few minutes,
disconnect the USB Cable and start again from Step 1.
Easy printing
1
Use HI to display the pictures you want
to print on the camera.
•
Display the image you want to print on the camera
and connect the camera with a printer using a USB
cable.
2
Press I.
•
The picture selection screen appears when printing is completed. To print
another picture, use HI to select the image and press the i button.
•
To exit, unplug the USB cable from the camera while the picture selection
screen is displayed.
EN
Multi-connector
USB port
Smaller terminal
Look for this mark.
USB cable
USB
STORAGE
MTP
PRINT
EXIT
SET
EASY PRINT START
PC/CUSTOM PRINT