Olympus 262857 Instruction Manual page 73

S BUTTON
Option
MY MODE
SETUP
BUTTON TIMER
T RELEASE
Option
RLS PRIORITY S
RLS PRIORITY C
U DISP/ 8 /PC
Option
HDMI
VIDEO OUT
When [MY MODE] (P. 80) is assigned to the < button,
frequently-used settings can be recalled by pressing the
< button. See page 104 for information on the settings
that can be saved using My Mode.
Saving My Mode Settings
1) Select [MY MODE1] or [MY MODE2] and press
I.
Select [SET] and press the i button.
2)
Recalling My Mode Settings
1) Select [MY MODE1] or [MY MODE2] and press
the i button.
Select [YES] and press the i button.
2)
• The selected My Mode is set.
• When shooting, press the shutter button while
holding down the < button.
If [3 SEC], [5 SEC], or [8 SEC] is selected, settings can
be adjusted for 3, 5, or 8 seconds after the F, P,
#, or jY button is released. If [HOLD] is selected,
settings can be adjusted until the button is pressed a
second time.
If [ON] is selected, the shutter can be released even
when the camera is not in focus. This option can be set
separately for S-AF (P. 44) and C-AF (P. 44) modes.
Selecting the digital video signal format for connecting
to a TV via an HDMI mini-cable. Choose [1080i] or
[720p] to automatically select 1080i or 720p output
where supported. Select [480p/576p] for 480p/576p
output; note however that when [PAL] is selected for
[VIDEO OUT] pictures will be displayed in 576p only.
Choose a setting that matches the television video input
setting.
You can select [NTSC] or [PAL] according to your TV's
video signal type.
Description
Description
Description
S
c
MENU
g
—
—
T
c
MENU
g
—
U
c
MENU
g
P. 67
P. 67
7

EN