TRENDnet TEW-635BRM - Wireless Router User Manual page 42

Internet IP Address
WAN MAC Address
Connection Details
MultiPVC Details
Connection Details
LAN
IP Address
Network Mask
DHCP Server
MAC Address
Wireless
SSID 1
SSID 2
Region
Channel
Wireless AP
Broadcast Name
System
Device Name
Firmware Version
Buttons
Attached Devices
•
Failed - The connection was terminated abnormally. This
could be caused by Modem failure, or the loss of the connec-
tion to the ISP's server.
If there is an error, you can click the "Connection Details" button
to find out more information.
This IP Address is allocated by the ISP (Internet Service Provid-
er). If using a dynamic IP address, and no connection currently
exists, this information is unavailable.
It displays the MAC address for the WAN.
Click this button to open a sub-window and view a detailed
description of the current connection. Depending on the type of
connection, a "log" may also be available.
Click this button to view the details of multi PVC in the sub-
screen.
Click this button to open a sub-window and view a detailed
description of the current connection.
The IP Address of the Wireless ADSL Modem Router.
The Network Mask (Subnet Mask) for the IP Address above.
This shows the status of the DHCP Server function. The value
will be "Enabled" or "Disabled".
This shows the MAC Address for the Wireless ADSL Modem
Router, as seen on the LAN interface.
It displays the name of the SSID 1.
It displays the name of the SSID 2.
The current region, as set on the Wireless screen.
This shows the Channel currently used, as set on the Wireless
screen.
This indicates whether or not the Wireless Access Point feature is
enabled.
This indicates whether or not the SSID is Broadcast. This setting
is on the Wireless screen.
The current name of the Router. This name is also the "hostname"
for users with an "@Home" type connection.
The version of the current firmware installed.
This will open a sub-window, showing all LAN and Wireless
devices currently on the network.
39