TRENDnet TEW-635BRM - Wireless Router User Manual page 17

IPoA
(IP over ATM)
The first time you connect to the Wireless ADSL Modem Router, you should run the Setup
Wizard to configure the ADSL and Internet Connection. There are two options. One is "Auto-
Detect" and another is "Manual Selection".
Auto-Detection
1. Click the Setup Wizard link on the main menu
2. On the first screen, select VC 1 (Router - Primary Internet Connection), then click "Next".
Note: Auto-detection does not support "MultiPVC". If you would like to enable the
multi PVC feature, you must use Manual Selection to setup your ADSL line.
Normally, the connection is
"Always on".
IP Address allocated to you, and
related information, such as
Network Mask, Gateway IP
address, and DNS address.
14