Replacing The Batteries; Installing The Storage Card - Newton QuickTake 200 Camera Getting Started

Replacing the batteries

When the batteries are low, the battery warning flashes on the liquid-crystal
display (LCD) screen to remind you to replace the batteries. The camera turns
itself off when the batteries get too low to use.
IMPORTANT
types together.
IMPORTANT
the environment. Please dispose of used batteries according to your local
Lithium
environmental guidelines.
(Li)

Installing the storage card

Before you can use your QuickTake 200 camera, you must install the storage
card that you received with the camera. After you install the card, you need to
format it using the Erase mode Format function. (You format the card the first
time that you use it in the camera.)
If the card is not in the camera, a
the LCD screen when you turn on the camera. You cannot take pictures
without a card.
Do not use old and new batteries together or batteries of different
Batteries contain chemicals, some of which may be harmful to
The use of storage cards other than that specified for use with
WARNING
your camera may result in damage to your camera.
message flashes on
NO CARD
Getting Started With the QuickTake 200 Camera
7