Using The Optical Viewfinder - Newton QuickTake 200 Camera Getting Started

Using the optical viewfinder

Attach the optical viewfinder to your camera to use when you are taking a
series of pictures, when you want to conserve the batteries, or when you are
outdoors and sunlight is distorting the LCD screen view.
Note that when you use the viewfinder, you will not be able to tell whether
the aperture setting is correct before you take the picture, because the LCD
screen is asleep. However, the overexposure or underexposure warning will
appear flashing on the screen after you take the picture if the condition exists.
Do not use the close-up focus with the viewfinder; it is not
IMPORTANT
accurate, because the parallex correction is off.
To install the optical viewfinder, hook the viewfinder to the front of the
camera first, then hook it to the back of the camera. Remove it in the same
way; don't pull the viewfinder off the camera.
Optical viewfinder
18
Chapter 2