Table of Contents
Advertisement
3 Configuration Utility
The Configuration Utility is a powerful application that helps you configure the Wireless LAN
PCI Card and monitor the link status and the statistics during the communication process.
This utility can be used to change the following configuration parameters when the device is
active.
3.1
Connect to the Wireless Network
From the "Connect to Wireless Network" screen you are able to view available wireless
networks within range of your computer and access to the network you intend to.
Parameter
Available Wireless Netowrks
Network Key
Confirm Network Key
Advanced Button
Description
This list shows all available wireless network within range of your
computer. If you want to connect to any network on the list, select
the network and click "Connect" button.
If the network is required for Wired Equivalent Privacy (WEP) key,
type the key in the text box. The key should be 10 or 26
hexadecimal characters according to the WEP mode setting (64-
bit or 128-bit) of the network.
Enter the same network key again to cofirm the key.
To configure additional wireless network setting, review the link
status and statistics or if you have difficulty connecting to a
network, click "Advanced" button.
7
Advertisement
Table of Contents
