Connect To Wireless Access Point; Using Realtek Wireless Configuration Utility - Edimax EW-7326Ig User Manual

5. Connect to Wireless Access Point

Using Configuration Utility to Connect to Wireless Access Point

5.1 Using Realtek Wireless Configuration Utility

1. After installation is complete, wireless configuration utility will be
shown an icon at your windows desktop as below. Please click the
icon by right mouse key to lunch the configuration utility.
2. Configuration utility will scan for wireless access points automatically,
and all found access points will be displayed on "Available Network".
Please select an access point you wish to connect, and click 'Add to
Profile'. If the wireless access point you want to connect does not
show here, please click 'Refresh'
3. If the wireless access point uses encryption, you have to input WEP
passphrase or WPA preshared key. Please ask the owner of the
wireless access point you want to connect, and input the correct
8