Technical Specifications - NETGEAR WG602 - 54 Mbps Wireless Access Point Reference Manual

NETGEAR 54 Mbps Wireless Access Point WG602v3 Reference Manual
Table A-1. Access Point Default Configuration Settings
Feature
Wireless Communication
Wireless Network Name (SSID)
Security
Broadcast SSID
Transmission Speed
Country/Region
RF Channel
Operating Mode
Data Rate
Output Power
Access Point Mode
Wireless Card Access List
MAC Address Filtering
WMM Support
Spanning Tree Protocol
a. Maximum Wireless signal rate derived from IEEE Standard 802.11 specifications. Actual throughput will vary.
Network conditions and environmental factors, including volume of network traffic, building materials and
construction, and network overhead, lower actual data throughput rate.

Technical Specifications

The following table lists the specifications for the WG602v3.
Table A-2. Technical Specifications
Parameter
Radio Data Rates
Frequency
Data Encoding:
Wireless Security:
A-2
Description
Enabled
NETGEAR
Disabled
Enabled
Auto
United States (in North America; otherwise, varies by
region)
11 until the region is selected
802.11b/802.11g
Best
Full
Access Point
All wireless stations allowed
Disabled
Disabled
Enabled
NETGEAR WG602v3 54 Mbps Wireless Access Point
1, 2, 5.5, 6, 9, 11, 12, 18, 24, 36, 48, and 54 Mbps Auto Rate Sensing
2.4-2.5Ghz
Direct Sequence Spread Spectrum (DSSS) for 802.11b and Orthogonal
Frequency Division Multiplexing (OFDM) for 802.11g
WEP and WPA-PSK
v1.0, August 2006
a
Default Configuration and Technical Specifications