Netbios Name Login; When Prompted Enter The Default User Name Admin And Default Password Password Into The Login Window And Click Ok - NETGEAR WG602 - 54 Mbps Wireless Access Point Reference Manual

NETGEAR 54 Mbps Wireless Access Point WG602v3 Reference Manual
3. When prompted enter the default User Name admin and default Password password into the
login window and click OK.
Figure 2-7
Once you have entered your User Name and Password, your Web browser should
automatically find the Wireless AP and display the home page, as shown in
2-4.

NetBIOS Name Login

The NETGEAR WG602v3 54 Mbps Wireless Access Point can be configured remotely from
Microsoft Internet Explorer browser version 5.0 or above, or Netscape Navigator Web browser
version 4.78 or above or Mozilla Firefox. You can connect to the WG602v3 by using its default
NetBIOS name or its default IP address.
To connect using the default IP address:
1. Enter the NetBIOS name of your access point. The default NetBIOS name is
NETGEARxxxxxx where xxxxxx is the last 6 digits of the WG602v3's MAC address (for
example, NETGEAR123456, with no spaces or delimiters.). To locate the NetBIOS name of
your WG602v3, see the bottom label.
Note: If the computer you are using to connect to the WG602v3 is on a different
subnet, you will not be able to connect via its NetBIOS name unless there is a
WINS server on your LAN. If the NetBIOS name login fails, use the procedure
for
2. Open a Web browser.
2-10
"IP Address Login" on page 2-9
v1.0, August 2006
Figure 2-3 on page
Installation and Configuration