Configuring The L2 Switch Settings - Cisco WRVS4400N - Small Business Wireless-N Gigabit Security Router Administration Manual

Setting Up and Configuring the WRVS4400N Wireless-N Router

Configuring the L2 Switch Settings

Configuring the L2 Switch Settings
Cisco WRVS4400N Wireless-N Gigabit Security Router with VPN Administration Guide
This section describes how to configure the Layer 2 Switch settings of the router:
•
Configuring Virtual LANs (VLANs) on page 142
•
Configuring VLAN Membership and Port Assignment on page 144
•
Configuring RADIUS Mode on page 146
•
Configuring Port Settings on page 147
•
Viewing Statistics Overview on page 149
•
Mirroring Ports on page 150
•
Configuring RSTP on page 151
The Layer 2 Switch window provides configurations to the layer 2 switching
features on the four Ethernet LAN ports of the router. They include VLAN, port
configuration, cable diagnostics, and RADIUS authentication.
5
141