Cisco WRVS4400N - Small Business Wireless-N Gigabit Security Router Administration Manual page 47

Setting Up and Configuring the WRVS4400N Wireless-N Router
Setting Up Your Wireless-N Router
Cisco WRVS4400N Wireless-N Gigabit Security Router with VPN Administration Guide
Heart Beat Signal
In Australia, select Heart Beat Signal from the Internet Connection Type drop-
down menu to use this service. Check with your ISP for the necessary setup
information, and enter the following:
• User Name and Password—Enter the user name and password provided
by your ISP.
• Heart Beat Server—Enter the IP address of the Heart Beat server.
• Connect on Demand: Max Idle Time—Configure the router to cut the
Internet connection after it has been inactive for a specified period of time
(Max Idle Time). If your Internet connection has been terminated due to
inactivity, Connect on Demand enables the router to automatically re-
establish your connection as soon as you attempt to access the Internet
again. If you wish to activate Connect on Demand, click the Connect on
Demand option and enter the number of minutes you want to have elapsed
before your Internet connection terminates in the Max Idle Time field. Use
this option to minimize your DSL connection time if it is charged based on
time. This option is disabled by default.
5
47