Back Panel; Wrvs4400N Antennas - Cisco WRVS4400N - Small Business Wireless-N Gigabit Security Router Administration Manual

Getting Started with the WRVS4400N Router

Back Panel

Back Panel

WRVS4400N Antennas

Cisco WRVS4400N Wireless-N Gigabit Security Router with VPN Administration Guide
The Ethernet ports, Internet port, Reset button, and Power port are on the back panel of
the router.
RESET
•
•
INTERNET
modem.
ETHERNET Ports
such as PCs, print servers, or additional switches.
POWER
adapter.
The router has three non-detachable 1.8dBi omni-directional antennas. The three
antennas have a base that can rotate 90 degrees when in the standing position.
The three antennas support 2X3 MIMO diversity in wireless-N mode.
Button—The Reset button can be used in two ways:
If the router is having problems connecting to the Internet, press
the Reset button for just a second with a paper clip or a pencil tip.
This is similar to pressing the reset button on your personal
computer to reboot it.
If you are experiencing extreme problems with the router and
have tried all other troubleshooting measures, press and hold in
the Reset button for 10 seconds. This restores the factory
defaults and clears all of the router settings, such as port
forwarding or a new password.
Port—Provides a WAN connection to a cable modem or DSL
1-4—Provide a LAN connection to network devices,
Port—Connects the router to power via the supplied AC power
4
20