Checking The Wireless Connection By Pinging - D-Link DWL-2200AP - AirPremier - Wireless Access Point Manual

Section 4 - Networking Basics
Click Apply Now.

The IP Address, Subnet mask, and the Router's IP Address will appear in a few

seconds.
Checking the Wireless Connection by Pinging in
Go to Start > Run > type cmd. A window similar to this one will appear. Type ping
xxx.xxx.xxx.xxx, where xxx is the IP address of the wireless router or access point.
A good wireless connection will show four replies from the wireless router or access
point, as shown.
D-Link DWL-2200AP User Manual
Windows XP and 2000
®
96