Section 3 - Configuration
The D-Link DWL-2200AP allows you to balance the distribution of wireless client
connections across multiple access points. Using load balancing, you can prevent
scenarios where a single access point in your network shows performance degradation
because it is handling a disproportionate share of the wireless traffic.
Load Balance:
User Limit:
Link Integrate:
Ethernet Link
D-Link DWL-2200AP User Manual
Select Enabled or Disabled.
When Load Balance is enabled, select the user limit.
Select Enabled or Disabled.
Displays the link status of the Ethernet connect.
Status:
Grouping
37