US Robotics USR9108 - U.S. Robotics Wireless MAXg User Manual page 6

If the status is CONNECTED TO THE INTERNET, you have successfully configured your Internet connection. If it does not say CONNECTED TO THE
INTERNET, go to the Troubleshooting section of this installation guide.
S t e p 5 . S e
In wireless communications, devices communicate with each other via radio waves rather than cables. The gateway can communicate wirelessly with any device that
has a wireless network adapter that meets wireless networking standards.
To set up wireless communications, click St at us at the top of the EasyConfigurator screen (if it is not already open). Then click Conf igure Wireless. Log in if the
software asks you to (use admin as the user name and password). This opens your Web browser to a page for setting up security on your wireless network. U.S.
Robotics strongly recommends that you secure your network as directed on this page.
t U p t h e W i r e l e s s C o n f i g u r a t i o n
PDFmyURL.com