Table of Contents
Advertisement
16
Installing the Hardware and Software
Troubleshooting Tips
• Check that the card is seated properly in the correct slot.
• Ensure the display cable is securely fastened to the card's display
connector.
• Make sure that the monitor and computer are plugged in and receiving
power.
• If necessary, disable any built-in graphics capabilities on your
motherboard. For more information, consult your computer's manual or
contact the manufacturer. (NOTE: Some manufacturers do not allow the
built-in graphics to be disabled or to become the secondary display.)
• Make sure you selected the appropriate display device and graphics card
when you installed the ATI driver.
• For more troubleshooting tips, right-click the ATI icon in the taskbar and
select Troubleshooting.
• If you have problems during bootup, start your computer in Safe Mode.
Press and hold the CTRL key until the Microsoft
Menu appears on the screen. Then select the number for Safe Mode, and
press Enter. (You can also use F8 to bring up the Microsoft Windows
Startup Menu.) In Safe Mode, bring up the Device Manager and check
for duplicate display adapter and monitor entries if you are only using one
graphics card.
• For more assistance, use the Troubleshooting Guide located in the
®
Windows
Help or contact your computer manufacturer.
Multiple Display Support
If you use multiple monitors, the ALL-IN-WONDER card must
be the primary graphics card. Normally, the system BIOS
determines whether the AGP or PCI card will be the primary.
For PCI cards, the system normally assigns priority to the card
slots in order of their appearance. Please read the Readme file
on the ATI Installation CD for the latest information regarding
Multiple Display Support.
®
®
Windows
Startup
®
Advertisement
Table of Contents
Troubleshooting
