Connecting To A Tv Or A Vcr - ATI Technologies 9200 - Radeon 128MB Video Graphics Card User Manual

28

Connecting to a TV or a VCR

To connect your card to a TV or a VCR, use the
available TV Output connector. Your card will
support either a S-video connector or a Composite
connector. If your TV has cable input only, you can
connect your card to your TV through your VCR or
an RF modulator (available in most electronics
stores).
The RADEON 9200 FSC Series with only a
Composite out connector DOES NOT support
connection to TVs with S-Video In.
Connecting Your TV Output to a TV or VCR
1
2
3
4
Turn off your PC and your TV (or VCR).
Determine if your TV (or VCR) has a S-Video In
or Composite In connection.
The TV Output on your card will be a S-Video
connector or Composite connector. If your
system shipped with a 4-to1 adapter cable,
connect this cable and an additional S-Video or
Composite cable as shown. Otherwise connect a
S-Video or Composite cable only to the TV
Output on your video card. Attach the other end
of the cable to your TV (or VCR).
Turn on your PC and your TV (or VCR).