Clone Mode Settings - ATI Technologies 9200 - Radeon 128MB Video Graphics Card User Manual

Brightness
Contrast
Saturation
Hue
Gamma
Clone mode
options
(optional)
Defaults
button

Clone Mode Settings

Standard
Theater Mode
Same on all
Theater Mode
Settings
Same as
source video
ATI Overlay Tab
Use this slider to adjust the brightness of the video
image.
Use this slider to adjust the contrast in the video image.
Use this slider to adjust the vividness of the color.
Sliding it all the way to the left removes all color and
produces a black and white picture.
Use this slider to adjust the pureness or tint of the red,
green and blue components of the color.
Use this slider to adjust the overall intensity of the video
image.
Click this button to access Clone Mode overlay
settings.These settings only apply to video content when
viewed in dual-controller Clone mode.
This allows you to reset the Overlay settings to default
values.
Clone Mode Options
Video content is displayed on your Primary display only.
Video content is displayed on your Primary and
Secondary displays. Video content is displayed on your
Secondary display(s) is always in full screen mode.
Note: your computer must be set for 16-bit color depth
or higher to use this mode.
Video content is displayed on your Primary and
Secondary display is exactly the same manner. For
example, all displays will show video output in full
screen mode.
These settings are available when Theater Mode is
selected.
The aspect ratio of the source video is maintained for full
screen display. Note: that this option may result in black
bars on either the horizontal or vertical sides of the video
display.
15