Canon 3249B001 Instruction Manual page 95

Activating the Custom Preset Settings
1. Press the CUSTOM PRESET SELECT
button.
• Repeatedly pressing the button will cycle through
the available custom preset files. You can also set a
custom key as [CP BKWD KEY] to cycle through
the custom preset files in reverse order (from last to
first) ( 75).
• When you are not using the custom preset
settings, set the camcorder to
• and the name of the selected custom preset file
will flash on the screen. After 4 seconds, the file
name will be replaced by the custom preset file
number.
2. Press the CUSTOM PRESET ON/OFF button.
and the name of the selected custom preset file will stay on and the custom settings will be activated.
After 4 seconds, the file name will be replaced by the custom preset file number.
Copying a Custom Preset File to the Memory Card
1. Open the menu, select [CUSTOMIZE] and then select the [CUSTOM PRESET]
submenu.
2. Select [ CAMERA
3. From the bottom bar, select [
preset file you want to copy to the card.
4. Select [ SAVE POSITION] and select the file name under which you want to store
the file on the memory card.
• Up to 20 custom preset files can be stored on the memory card. If you try to save more than 20 custom
preset filed one of the files on the card will be overwritten (you can select which file to overwrite).
• If there are no custom preset files saved on the memory card, the default file name will be "NEW_FILE".
5. Select [ EXECUTE] and in the confirmation screen select [EXECUTE] to copy the
file.
6. Close the menu.
Reading a Custom Preset File from the Memory Card
1. Open the menu, select [CUSTOMIZE] and then select the [CUSTOM PRESET]
submenu.
2. Select [ CARD
3. From the bottom bar, select [
preset file you want to read to the camcorder.
4. Select [ SELECT POSITION] and select the preset number under which you want to
store the file in the camcorder.
5. Select [ EXECUTE] and in the confirmation screen select [EXECUTE] to load the
file.
6. Close the menu.
.
CARD] from the column on the left.
SELECT CP] and then select the name of the custom
CAMERA] from the column on the left.
IMPORT] and then select the name of the custom
95