Connecting To A Monitor/Tv - Canon 3249B001 Instruction Manual

Connecting to a Monitor/TV

The different recording modes and the corresponding output terminals are given in the table below:
HD/SD SDI Terminal*
HD [LETTERBOX] 1920x1080
set to [OFF]
[LETTERBOX] SD SDI
set to [ON]
SD 16:9 [LETTERBOX] 640x480
set to [OFF]
[LETTERBOX] SD SDI
set to [ON]
SD 4:3 640x480
* only.
Displaying the Viewfinder's Screen on an External Monitor
The screen of an external monitor or viewfinder connected to the EVF2 socket will show the exact same
picture as displayed on the camcorder's viewfinder screen. Use the supplied external monitor cable to
connect to a monitor or TV equipped with component video inputs.
COMPONENT OUT
Terminal
D3 (1440x1080) MPEG TS
D1 (SD) MPEG TS
D1 (SD) DV (SD)
D1 (SD) DV (SD)
D1 (SD) Normal DV (SD)
External Monitor Cable (supplied)
Signal flow
HDV/DV VIDEO and
Terminal Terminals
Green
Blue
Red
Y
Pb
Pr
81