Table of Contents
Advertisement
Push AE
In M Manual mode you can use the Push AE function
when you want the camcorder to re-establish optimal
exposure settings by automatically adjusting the
aperture and gain (if the AGC switch is set to ON).
Press the PUSH AE button and hold it pressed
down.
• The camcorder will adjust the aperture value and gain
to achieve optimal exposure (
exposure indicator).
• After you release the button, the aperture value and gain (if the AGC switch is set to ON) set by the
camcorder will override the previous settings made in M Manual mode.
You can use the custom keys (
prevent the accidental operation of the PUSH AE button.
mark above the
71) or the [SYSTEM SETUP/
PUSH AE
button
]
[E.LCK B.LCK] setting to
57
Advertisement
Table of Contents
