Adjusting The Audio Recording Level - Canon 3235B001 Instruction Manual

Hd video camera recorder

Hide thumbs Also See for 3235B001:

Product manual (28 pages)

Table Of Contents

100

101

102

103

104

105

106

107

108

109

110

111

112

113

114

115

116

117

118

119

120

121

122

123

124

125

126

127

128

129

130

131

132

133

134

135

136

137

138

139

140

141

142

143

144

145

146

147

148

149

150

151

152

Table of Contents

Using the XLR terminals

1. Connect a microphone to one of the XLR

terminals.

To supply a microphone with phantom power, set the

corresponding

switch to ON. Make sure to

connect the microphone first, before turning the

phantom power on. Keep the microphone connected

when turning off the phantom power.

2. Open the menu and select [AUDIO SETUP].

Select [CH1 INPUT] or [CH2 INPUT], and

select a setting option.

• Select [XLR MIC] or [XLR LINE] for channel 1 or

channel 2.

• When using the XLR terminal to record to only one

channel, use the CH1 input terminal and set [CH1

INPUT] to [XLR MIC] or [XLR LINE].

3. From the [AUDIO SETUP] menu, select [XLR REC CH], select a setting option and

close the menu.

Select [CH1] to record on channel 1 the audio from the CH1 input terminal or [CH1/CH2] to record the

audio on both channels.

4. If necessary, turn on the microphone attenuator (20 dB) by setting the corresponding

switch to ATT.

The microphone attenuator will only be effective when the input is set to [XLR MIC].

5. If necessary, adjust the gain of the input signal. Open the menu and select [AUDIO

SETUP]. Select [XLR 1 TRIM] or [XLR 2 TRIM], depending on the audio input you want

to adjust. Select a setting option and close the menu.

The gain adjustment will only be effective when the input is set to [XLR MIC].

When connecting a microphone that does not support phantom power, make sure to set the

corresponding

When [XLR REC CH] is set to [CH1/CH2], audio from the CH2 input terminal will not be recorded.