Erasing Still images
You can erase still images one at a time or all at once.
Be careful when erasing still images. Erased still images cannot be recovered.
Erasing a still image that had a custom preset file embedded (recorded with the
[PHOTO + CP DATA] setting) will erase the still image and the embedded custom preset file.
Protected still images (
Erasing a Single Still Image
1. Select the still image you wish to erase.
2. Press the SELECT/SET dial to open the still image operations menu.
In
or immediately after recording a still image.
3. Select [
IMAGE ERASE].
4. Select [ERASE].
The image is erased and the previous image appears.
5. Select [ CLOSE] to close the menu.
Erasing All Images
MENU
CARD OPERATIONS
(
25)
1. Open the menu and select [CARD OPERATIONS].
2. Select [ERASE ALL IMAGES].
3. Select [YES] and close the menu.
All still images except the protected ones are erased.
120
121) cannot be erased.
mode, the menu appears when you press the dial while you are reviewing a still image,
ERASE ALL IMAGES