Protecting Still Images - Canon 3235B001 Instruction Manual

Protecting Still images

You can protect important still images from accidental erasure when displaying a single image or the
index screen.
If a memory card is initialized, all still images, even protected ones, will be erased permanently.
Protecting a Single Still Image
1. Select the still image you wish to protect.
2. Press the SELECT/SET dial to open the still image operations menu.
In mode, the menu appears when you press the dial while you are reviewing a still image,
or immediately after recording a still image.
3. Select [ PROTECT].
4. Select [ON].
To remove the protection select [OFF] instead.
5. Select [ CLOSE] to close the menu.
appears and now the image cannot be erased.
Protecting Still Images from the Index Screen
MENU
CARD OPERATIONS
( 25)
1. Move the zoom lever toward W.
Up to 6 still images appear.
2. Open the menu and select [CARD OPERATIONS]. Select [
the SELECT/SET dial.
3. Select the image you wish to protect and press the dial.
• appears on the image.
• Select additional images with the SELECT/SET dial and protect them in the same way.
4. Close the menu to return to the index screen.
PROTECT
PROTECT] and press
121