Yamaha Programmable Mixer 01 Getting Started Manual page 22

16
Chapter 3: Basic Mixing Tutorial
ProMix 01 Getting Started Guide
Setting EQ Frequency
1. Press [MID].
The MID gain (G) parameter is selected.
2. Set the gain to –10dB.
3. Press [MID] again.
The MID frequency (F) parameter is selected.
4. Use the PARAMETER wheel to sweep through the frequency
range. The MID band covers virtually the entire audio spec-
trum, from 32Hz to 18kHz.
Note: Although it may take a little while to draw the EQ curve, the inter-
nal EQ circuits reflect your adjustments immediately.
As well as the frequency value in Hz, the dotted vertical line on the
EQ graph indicates the current frequency position.
5. Set the MID frequency back to 2.0kHz.
6. Press [MID] twice, then set the MID gain back to 0dB.