Recalling Mix Scenes - Yamaha Programmable Mixer 01 Getting Started Manual

29

Recalling Mix Scenes

Recalling Mix Scenes

Now we'll take a look at recalling mix scenes. Since you've stored only
one mix scene so far, first we'll recall mix scene 00 to reset all the mix
settings, then recall mix scene #01 to return to our previous mix set-
tings. Unlike mix scenes 01 to 50, mix scene 00 is read-only and is used
to reset all mix settings. You cannot store it.
If you're continuing from the "Storing Mix Scenes" tutorial on
page 28, the MEMORY LCD function shown below will already be
selected. If another LCD function is selected you need to press the
[RECALL] button first. Note that if you press the [RECALL] button
when the MEMORY LCD function is selected you'll store the current
mix settings—there is no warning before store is executed.
1. Use the PARAMETER wheel to select mix scene #00, "InitData".
READ ONLY appears on the display and the name and number flash.
2. Press [RECALL].
The sound is cut and all mix settings are reset to their initial settings.
The message <<Recalled>> appears briefly. The mix scene name and
number, "InitData 00", appear in the MEMORY area of the display.
Now we'll recall mix scene #01 to return to our previous mix settings.
3. Use the PARAMETER wheel to select mix scene #01.
Its name and number flash.
4. Press [RECALL].
The sound reappears and mix scene #01 is recalled. All mix settings
return to the way we left them when mix scene #01 was stored and
the faders move to their new positions automatically. The display
looks something like the one shown below, with the mix scene name
and number shown in the MEMORY area and "01=Finale" in the mix
scene list. The word EDIT has disappeared.
When you change a mix setting, the word EDIT reappears, indicating
that the current mix settings no longer match those of mix scene #01.
ProMix 01 Getting Started Guide