Control Panel; Led Indicators - EdgeStar AP410W Owner's Manual

Control panel

LED indicators

1. "ST"
When this light is lit (when the TEMP. UP or TEMP. DOWN buttons are
pressed), the LED display shows the temperature that the unit is set to cool to.
2. "RT"
When this light is lit the LED display shows the current ambient temperature in
the room.
3. "LO"
This light is lit when the fan speed is on Low.
4. "HI"
This light is lit when the fan speed is on High.
5. "AUTO"
This light is lit when the Auto mode is selected. The Auto mode is factory preset
to maintain an ambient temperature of 73°F. If the ambient temperature is above
73°F, the unit will operate in cooling mode. If the ambient temperature is equal to
or below 73°F, the unit will operate in Fan mode.
6. "COOL"
This light is lit when the Cooling mode is operating.
7. "DRY"
This light is lit when the Dehumidifier mode is operating. The Dehumidifier mode
is factory pre-set to one dehumidification setting- and the dehumidification
settings cannot be user-altered.
8. "FAN"
This light is lit when the Fan mode is operating.
9. "TIMER"
This light is lit when the Timer is on. See below for a description of the Timer.
10. "RUN"
This light is lit when the unit is on.
= Set Temperature
= Room Temperature
= Low Fan Speed
= High Fan Speed
= Auto Mode
= Cooling Mode
= Dehumidifier Mode
= Fan Mode
= Timer On
= Unit On
12