EdgeStar AP410HS Installation Manual

Edgestar ap410hs: install guide

Hide thumbs Also See for AP410HS:

Installing the exhaust hose

In order to be used effectively, the exhaust hose must be mounted to the back of the

unit.

1. Make sure the rectangular vent connector is fitted to one end of the exhaust hose

and fit the round adapter to the other end.

2. Insert the rectangular vent connector into the exhaust port on the back of the unit.

Table of Contents

Do you have a question about the AP410HS and is the answer not in the manual?

Page 1 Installation Installing the exhaust hose In order to be used effectively, the exhaust hose must be mounted to the back of the unit. 1. Make sure the rectangular vent connector is fitted to one end of the exhaust hose and fit the round adapter to the other end. 2.
Page 2 Window installation This portable air conditioner ships with a foam window kit for temporary mounting in standard windows. 1. Punch the circular cut-out out of the foam window kit. Insert the round adaptor into the cut-out. Open the window and place the foam window kit in it, with the circle cut-out near where you are going to place the portable air conditioner.
Page 3 4. Replace the round adapter into the wall and screw it into place. 5. Move the portable air conditioner into place near the wall and insert the exhaust hose into the round adapter. Twist the exhaust hose into the adapter in a clockwise direction.

Ap450zAp410w