Assembling Parts; Assembled Vacuum Cleaner Parts; Attaching The Handle; Attaching The Hose And Tools - Samsung SU2911 Operating Instructions Manual

Assembled Vacuum Cleaner Parts

1-1
Front
WARNING!
OPERATE THE VACUUM CLEANER ONLY AT THE VOLTAGE SPECIFIED ON THE NAMEPLATE.
Step 1. Attaching the Handle
1-2
Step 2. Attaching the Hose and Tools
1-4
A s s e m b l i n g Pa r t s
Back
Stand the vacuum upright
and slide the base of the
handle firmly into the
grooves at the top of the
vacuum body.
Slide the end of the hose
wand with tabs into the
Hose Wand Base.
The assembled cleaner will look
like the illustration to the left.
1.Handle
2.Power switch
3.Quick release cord hook
4.Post-Motor Filter
5.Crevice tool
6.Handle release
7.Carrying handle
8.Hose
9.Extension wand
10.Combination tool
11.Cyclone-Lever
12.Dirt Cup
13.Filter Cup
14.Upper Tank
15.Louvers
16.Hose Wand Base
17.Height Adjustment Dial
18.Hose Clip
1-3
1-5
2
Insert the screw provided
into the existing hole.
Tighten the screw securely
with a screwdriver.
Before securing the handle,
please check that the
handle is fitted to the
vacuum body and make
sure there's no gap.
Slide the extension
wand and the crevice
tool together into the
storage clip.