Advertisement

Quick Links

Vacuum Cleaner

✻ Before operating this unit, please read the instructions carefully.
✻ For indoor use only.
user manual
imagine
the possibilities
Thank you for purchasing a Samsung product.
To receive a more complete service,
please register your product at
www.samsung.com/register
SU33 SERIES
English

Advertisement

Table of Contents
loading

Summary of Contents for Samsung SU3364

  • Page 1: Vacuum Cleaner

    Vacuum Cleaner user manual ✻ Before operating this unit, please read the instructions carefully. ✻ For indoor use only. imagine Thank you for purchasing a Samsung product. To receive a more complete service, please register your product at www.samsung.com/register the possibilities...
  • Page 2: Safety Information

    IMpORTANT SAFETY INSTRUcTIONS Thank you for purchasing a Samsung vacuum cleaner. When using an electrical appliance, basic precautions should always be followed, including the following : pLEASE READ ALL WARNINGS AND INSTRUcTIONS BEFORE USING THIS VAcUUM cLEANER. WARNING : To reduce the risk of fire, electric shock, or injury.
  • Page 3: Save These Instructions

    safety information • A void picking up hard, sharp objects with the cleaner. They may damage the cleaner. • A lways turn off this appliance before connecting or disconnecting the hose, removing the bottom plate for maintenance. • Use only on dry, indoor surfaces, never change the plug in any way. • Do not modify the polarized plug to fit a non-polarized outlet or extension cord. • Do not touch the brush roller when it is rotating. • Keep suction away from your face when using nozzles and pipe. • D o not pull the power cord around sharp corners and do not allow it to be trapped. • Unplug before connecting turbine nozzle.(only using turbine-brush model) • T his appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.
  • Page 4 safety information SAFETY INFORMATION Before operating the appliance, please read this manual thoroughly and retain • it for your reference. WARNING Because these following operating instructions cover various models, • the characteristics of your vacuum cleaner may differ slightly from those WARNING described in this manual.
  • Page 5: Table Of Contents

    Contents AssemblING The CleANeR OpeRATING The CleANeR mAINTeNANCe TROUbleshOOTING 06. Product View 07. Attach Handle to Vacuum 07. Attach Dust Bin to Vacuum 07. Attach Vacuum Hose and Tools 08. Power Switch 08. Handle Positions 08. Height Adjustment 08. Transporting Cleaner 09.
  • Page 6: Assembling The Cleaner

    Assembling the cleaner pRODUcT VIEW Handle *option Bracket Brush (Select Models Only) *option Mini Turbo Brush (Select Models Only) Carrying Handle Grille Cyclone Dust Bin Post-Motor Filter (Post-Motor Filter is located behind the door.) Powerfoot Height Adjustment Knob Do not plug in your vacuum cleaner until you are familiar with all instructions and operating procedures. CAUTION Plastic film can be dangerous. To avoid danger of suffocation, keep away from babies and children.
  • Page 7: Attach Handle To Vacuum

    Assembling the cleaner ATTAcH HANDLE TO VAcUUM 1. S tand the vacuum upright and slide the base of the handle firmly into the grooves at the top of the vacuum body. 2. C heck to be sure the handle is fitted to the vacuum body. If there is a gap, continue to push firmly until the handle is flush. 3. I nsert the screw provided from the screw packet into the existing hole. Tighten securely with a screwdriver.
  • Page 8: Operating The Cleaner

    Operating the cleaner pOWER SWITcH The Power Switch is located on the side of the vacuum. Push the rocker switch “ON” to vacuum, and “OFF” when cleaning is complete. HANDLE pOSITIONS Press the handle release pedal, located on the lower left side of the vacuum, with your foot to place your vacuum into one of three cleaning positions. 1.
  • Page 9: Special On-Board Tools

    Operating the cleaner SpEcIAL ON-BOARD TOOLS Your vacuum is not only a powerful carpet and rug cleaner, it’s also a versatile above floor vacuum cleaner when you select one of the special tools. 1. R aise Handle to Upright Position. 2. G rasp the end of the Hose Wand and lift Hose Wand to separate from the Hose Wand Base.
  • Page 10: Empty Dust Bin

    Maintenance To maintain maximum cleaning performance, the following maintenance steps must be performed: 1. E mpty the Dust Bin when the dirt reaches the “MAX” line on the side. 2. C leaning the Grille Cyclone when the Dust Bin become clogged. 3. C heck the Pre-Motor Filter at least once a month and clean or replace as needed. 4. R eplace the Post-Motor Filter every three to six months. Note : M ore frequent filter cleaning or replacing may be necessary if you are vacuuming new carpet, fine dust, or have allergy concerns.
  • Page 11: Cleaning The Pre-Motor Filter

    Maintenance cLEANING THE pRE-MOTOR FILTER Sponge Filter 1. Unplug the Vacuum Cleaner from electrical outlet. 2. T he Pre-Motor Filter(Sponge Filter, Micro Filter) protects the motor from dirt particles. It is located underneath the Dust Bin. If the Pre-Motor Filter becomes dirty, remove and clean it. Note : T he Pre-Motor Filter may be hand washed in cold water with mild detergent. Rinse well and air dry thoroughly before re-installing. cLEANING THE pOST-MOTOR FILTER 1. Unplug the Vacuum Cleaner from electrical outlet. 2. T he Post-Motor Filter assists in the filtration process to return clean air to the room. It is located behind the door on the front of the Cleaner. When the filter becomes dirty, open the door, remove the filter and shake the dust off the filter. Note : T he Post-Motor Filter is not washable, therefore do not wash it in the water.
  • Page 12: Check Rotating Brush And Drive Belt

    Maintenance cHEcK ROTATING BRUSH AND DRIVE BELT You should check your vacuum cleaner’s Rotating Floor Brush and Drive Belt regularly for wear or damage. You should also clean the brush and brush ends of strings, hair, and carpet fibers. These can wrap around the brush and hamper its ability to effectively clean your carpet.
  • Page 13: Mini Turbo Brush

    Maintenance MINI TURBO BRUSH Brushbar Replacement 1. Remove the tool from the hose, and turn upside down. Slide the switch to unlock position and remove bottom plate. 2. Unscrew the one screw and remove belt guard. 3. Remove brushbar including end plates and discard. 4. I nspect belt to ensure that it is in good condition. If broken or cracked, please replace. (See below for details.) 5. With the curved ends facing down, slide end plates of brushbar into slots on the tool.
  • Page 14: Troubleshooting

    Troubleshooting Check this list of possible problems and solutions before bringing your vacuum to a service center. pROblem Vacuum cleaner won’t run • Power cord not plugged in • Blown fuse/tripped breaker in home Vacuum cleaner and tools won’t pick up dirt •...
  • Page 15 Memo memo _15...
  • Page 16 If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer care center. Country Customer Care Center 0330 SAMSUNG (7267864) SOUTH AFRICA 0860 7267864 (SAMSUNG) Web Site ☎ www.samsung.com www.samsung.com Code No. DJ68-00450K REV(0.1)

This manual is also suitable for:

Su33 series

Table of Contents