Table of Contents
Advertisement
DJ68-00104A
10/18/01 11:53 AM
Located in the top rear side of the vacuum cleaner,there is
a nozzle support that can be used to park the nozzle during
pauses in cleaning
TRANSPORTING AND STORING THE VACUUM CLEANER
For easy storage and transportation, this vacuum cleaner has a
clip system built into body, which will keep the wand, hose and
nozzle in an upright position.
1) To open the dust cover of the dust bag com-
partment, press the clamper upwards(the clam-
per is located at the front of the dust cover).
3) After removing the used dust bag, insert the
cardboard bag collar of the new dust bag into
its original position.
Page 7
REPLACING THE DUST BAG
2) Remove the dust bag from the cleaner
4) Press the dust cover down gently until the
clamper relocks.
6
PARK POSITION
Advertisement
Table of Contents
