Table of Contents
Advertisement
DJ68-00104A
10/18/01 11:53 AM
ASSEMBLING THE VACUUM-CLEANER READY FOR USE
1) Connect the suction hose to the suction tube.
OPTION :
Connect the suction tubes together.
3) Connect the nozzle to the suction tube.
Page 4
2) Adjust the suction tube(depending on model).
EXTENDING : Holding the narrow part of
➁
SHORTENING : Holding the narrow part of
NOTE :
4) Connect the body connector to the body of the
cleaner.
3
the telescopic tube with one
hand, push the handle in the
opposite direction with your
other hand.
the telescopic tube with
one hand, pull the handle
towards it using the other hand.
Adjustable telescopic tube is not
available with all models.
Advertisement
Table of Contents
