Auto Repeat Play; Interval Repeat Play; Using The Tape Counter - Samsung SV-251GX Instruction Manual

01823H SV-657GX/EUR-GB2 4/19/02 5:02 PM

Auto Repeat Play

You can set repeat play to repeat the tape
continuously from beginning to end.
1
Press MENU on the remote control.
Result: The programming menu is displayed.
or ➛, ❿ buttons to
2 Press the corresponding ,
" ❷
select the EASY OPERATION option.
3
Press the OK button to select this option.
Result: The menu is displayed.
EASY OPERATION
4
Press the corresponding or buttons, until the
" ❷
REPEAT PLAY option is selected.
5 Press ➛ or ❿, until...
To...
Repeat play ON is displayed.
Do not wish to repeat play OFF is displayed.
6 On completion, press MENU twice to exit the menu.
GB
ShowView EXTEND (SV-657GX/
SV-655GX/SV-455GX/SV-255GX Only)
To prevent delays or over-runs the VCR has a
function called ShowView EXTEND allowing you to
extend the recording time by up to 60 minutes.
Only use if PDC is not available or set to
OFF.
1
Press the MENU button on the remote control.
2 or ➛, ❿ buttons to
Press the corresponding ,
" ❷
select the EASY OPERATION option.
3
Press the OK button to select this option.
Result: The EASY OPERATION menu is displayed.
4 Press the corresponding or buttons, until the
" ❷
SHOWVIEW EXTEND option is selected.
5 Press ➛ or ❿ buttons to set the ShowView EXTEND
time by increments of 10 minutes.
6 To turn off, press ➛ or ❿ buttons repeatedly until
OFF shows.
24
Page 24

Interval Repeat Play

You can set interval repeat play to repeat the
cassette several times for special interval.
1
Press MENU on the remote control.
Result: The programming menu is displayed.
2 or ➛, ❿ buttons to
Press the corresponding ,
" ❷
select the EASY OPERATION option.
3
Press the OK button to select this option.
Result: The EASY OPERATIONN menu is displayed.
4 Press the corresponding or buttons, until the
" ❷
NO. OF INTERVAL REPEAT option is selected.
5 To... Press ❿, until...
Interval repeat play 5, 10, 15 is displayed.
(choose repeat time 5 times,
10 times, 15 times)
Cancel interval OFF is displayed.
repeat play
6 On completion, press MENU twice to exit the menu.
7
To select interval during playback, press the
INPUT/REPEAT button at the desired start point.
Result: " INTERVAL REPEAT SETTING " is
displayed.Press the INPUT/REPEAT button
one more time at the desired end point.
Result: The tape is automatically rewound to the start
point. " " is displayed.
INTERVAL REPEAT

Using the Tape Counter

The tape counter:
Indicates the elapsed time in the play and record
modes (hours, minutes and seconds)
Is reset when a cassette is inserted in the VCR
Allows you to find the beginning of a sequence easily
If the remaining time is to be calculated correctly,
you must indicate the type of cassette being used.
1 Insert a cassette in your VCR.
2
To set the tape counter to zero at the beginning of a
sequence:
Press DISP./ or DISPLAY twice to display the
counter
Press CLR/RST when you want to set the tape
counter to zero
3
When you are ready,
Start playback or Recording.
Press the button.
To fast-froward or rewind to the sequence at
➛ ➛ ❿ ❿
which the counter was set to zero, press or .
Some VCR information, such as the counter, can
be displayed on the television screen (unless you
have deactivated the OSD mode; refer to page 16).
Press DISP./ or DISPLAY:
Once to display the current function,
programme number, recording speed, date,
time and counter
Twice to display the counter only
Three times to display the time remaining
on the cassette
Four times to clear the display
AV-Link Function of this VCR (SV-657GX Only)
If your TV has "Easy Link / nexTViewLink / AV-Link" function, the VCR can automatically store stations
memorized in the TV in the same channel position as those of the TV.
Using a SCART cable (21 pins), a mutual control is available with the TV, VCR, SAT receiver, etc.
The VCR automatically stores all your current TV stations in the VCR in the same position order as the
TV channels. ("TV CH DOWNLOAD")
Even if the TV is in standby mode, the TV automatically turns on and displays the video picture when
you start playback on the VCR.
The VCR automatically selects the same picture as you are watching on the TV, and record it. ("TV
PICTURE")
The VCR takes in the data and turns to timer standby mode, after a program data reserved is
transferred to the VCR by a TV using such as a EPG (Electronic Program Guide). In this case, the TV's
and the VCR's channel position must be set to the same TV station. The position could be stored from
1 to 80. Also the VCR's clock must be set.
Connection
Connect your EasyLink / nexTViewLink / AV-Link TV to the AV1 (EURO AV) socket on the rear of the VCR using the
SCART cable. Refer to your TV's manual additionally.
- Connection to your EasyLink / nexTViewLink / AV-Link TV
TV
AERIAL IN
AUDIO/VIDEO
AERIAL OUTPUT
IN/OUT (SCART)
When connecting another VCR supporting EasyLink / nexTViewLink / AV-Link functions
The "nexTViewLink" system can connect 2 VCRs (VCR1 and VCR2) at the same time. This VCR is adjusted to
"VCR1", so it should be connected to VCR2.
TV
VCR2
SCART cable
SCART cable
- Connection to your EasyLink / nexTViewLink / AV-Link TV and a satellite receiver
Satellite antenna AERIAL INPUT
AERIAL OUTPUT
TV AERIAL INPUT
AUDIO/VIDEO
AERIAL IN
21 pins SCART cable
IN/OUT(SCART)
AERIAL INPUT
AV2 (SATELLITE) IN
OUT/SORTIE
R/D
TV
AUDIO
L/G
AV1 (EURO AV)
SCART Cable
this VCR
VCR1
IN/OUT(SCART)
SCART cable
SATELLITE IN
AV2 (SATELLITE) IN
OUT/SORTIE
R/D
TV
AUDIO
L/G
AV1 (EURO AV)
25
GB