Download Print this page

Samsung SV-251GX Instruction Manual: Deciding How To Connect Your Vcr; Connecting Your Vcr To The Tv Using The Coaxial Cable; Connecting Your Vcr To The Tv Using The Scart Cable

Hide thumbs

Advertisement

01823H SV-657GX/EUR-GB1
4/19/02 4:58 PM

Deciding How to Connect Your VCR

You must take into account various factors when connecting audio or video systems:
Types of connectors available on your systems
Systems connected permanently to the VCR (satellite receiver for example) or temporarily
(camcorder for example)
Your VCR is equipped with the following connectors.
Connector
Location
Type
AV1
Rear
SCART
AV1 (EURO AV)
AV2
Rear
SCART
AV2 (DEC./EXT.)
GB
OUT TO TV
Rear
75
TV
coaxial
IN FROM ANT. Rear
75
coaxial
AUX
Front
Audio/Video RCA
VIDEO
L - AUDIO - R
AUX
(SV-657GX/SV-655GX/SV-651GX only)
Audio output
Rear
Audio RCA
OUT/SORTIE
R/D
AUDIO
L/G
(SV-657GX/SV-655GX/SV-651GX only)
Whenever you connect an audio or video system to your VCR, ensure that all elements are
switched off.
Refer to the documentation supplied with your equipment for detailed connection instructions
and associated safety precautions.
10
Page 10
Direction
Recommended Use
In/Out
Television
Satellite receiver
Other VCR
In/Out
Decoder for scrambled Pay TV
broadcasts
Example:
CANAL+.
Satellite receiver
Other VCR
Out
Television
In
Aerial
Cable television network
Satellite receiver
In
Audio Hi-Fi system
Camcorder
Hi-Fi Stereo VCR
Out
Audio Hi-Fi system
Connecting Your VCR to the TV using the Coaxial Cable
To receive television programmes a signal must be received from
one of the following sources:
An outdoor aerial
An indoor aerial
A cable television network
A satellite receiver
Make sure that both the television and the VCR are
switched off before connecting the cables.
1
Remove the aerial or network input cable from the television.
2
Connect this cable to the 75 coaxial socket marked
rear of your VCR.
3
Plug the coaxial cable supplied into the
TV
socket on your VCR.
4
Plug the other end of the coaxial cable into the connector
previously used for the aerial on the television.
5
To obtain better quality pictures and sound on your television, you
can also connect your VCR to the television via the SCART cable
(see section below) if your television is equipped with this type of
connection.
Connecting Your VCR to the TV using the SCART Cable
TV
Aerial
3
AV2 (DEC./EXT.)
RF coaxial
OUT/SORTIE
R/D
cable
TV
AUDIO
L/G
AV1 (EURO AV)
2
SCART Cable
You can connect your VCR to the television using the SCART cable if the appropriate input is available on
the television. You thus:
Obtain better quality sound and pictures
Simplify the setting up procedure of your VCR
Regardless of the type of connection chosen, you must always connect the coaxial cable
supplied. Otherwise, no picture will be visible on the screen when the VCR is switched off.
Make sure that both the television and the VCR are switched off before connecting the cables.
You can connect your VCR to a Hi-Fi system.
Example: You wish to take advantage of the quality of your Hi-Fi stereo system when watching a
programme or recording via your VCR. (SV-657GX/SV-655GX/SV-651GX only)
1
Connect the coaxial cable as indicated in the above section.
2
Connect one end of the SCART cable to the AV1(EURO AV) socket on the rear of the VCR.
3
Plug the other end into the appropriate connector on the television.
4
Plug the RCA Audio cable with stereo system into the Audio out socket on the rear of the VCR.
(SV-657GX/SV-655GX/SV-651GX only)
AV2 (DEC./EXT.)
OUT/SORTIE
R/D
TV
2
AUDIO
L/G
AV1 (EURO AV)
on the
TV
AV2 (DEC./EXT.)
TV
AV1 (EURO AV)
3
4
4
11
GB

Advertisement

   Also See for Samsung SV-251GX

   Related Manuals for Samsung SV-251GX

This manual also for:

Sv-255gx, Sv-451gx, Sv-651gx, Sv-655gx, Sv-657gx, Sv-455gx

Comments to this Manuals

Symbols: 0
Latest comments: