Samsung SV-251GX Instruction Manual: Using The Timer Programming Feature; Checking A Preset Recording; Cancelling A Preset Recording; Adjusting Picture Alignment Manually

Hide thumbs

Advertisement

01823H SV-657GX/EUR-GB2
4/19/02 5:01 PM

Using the Timer Programming Feature

The Timer Programming feature allows you to preset
the VCR to record a programme up to one month
before that programme is to be broadcast. Up to six
programmes can be preset.
Before presetting a recording, check that the
date and time are correct.
1
- Insert the cassette. Press the TIMER button.
Press the
or
buttons to select the
STANDARD
"
option and then press the ❿!button or,
Press MENU on the remote control.
Result: The programming menu is displayed.
Press the OK button to select
TIMER PROGRAMMING
option.
Result: The
TIMER PROGRAMMING
menu is
displayed.
2
Press ❿!!to select the input source.
3
Select the required station by pressing the
buttons or INPUT to select the AV1, AV2 or AUX
(SV-657GX/SV-655GX/SV-651GX only) input sources.
4
Press ❿!!to select the recording day.
5
Select the required day by pressing the
or
"
6
Press ❿!!to select the recording start time.
GB
7
Select the required hour value by pressing the
buttons.
8
Press ❿!!to select the minutes.
9
Select the required minute value by pressing the
or
buttons.
10
Press ❿!!to select the recording end time.
11
Select the required recording end time by pressing
the
or
buttons, following the same procedure
"
❷!
as when selecting the recording start time.
With SV-657GX/SV-655GX/SV-651GX/SV-455GX/
SV-451GX, you can select the recording speed.
a. Press ❿ to select the the recording speed
(AUTO/SP/LP).
b. Press the
or
buttons to switch between the
"
AUTO
,
SP
(Standard Play) or
LP
(Long Play).
With SV-657GX/SV-655GX/SV-651GX you can
select the VPS or PDC recording mode.
a. Press ❿ to select the VPS or PDC(V/P) recording
mode.
b.Press the
or
buttons to toggle between the
"
VPS or PDC mode (marked
ON
) and the non-
VPS/PDC mode (marked
-
).
12
When you have finished, press the MENU button.
13
Press the VCR STANDBY/ON (STANDBY/ON)
button to activate the timer.
Result: Before starting recording, the VCR compares
the timer duration with the remaining time on
the cassette.
Auto Tape Speed Select (SV-657GX/SV-655GX/
SV-651GX/SV-455GX/SV-451GX Only)
The VCR's "Auto Tape Speed Select" function
compares the duration of the timer recording to the
actual recording time remaining on the tape loaded. If
there is insufficient tape to complete a timer recording
in AUTO mode, the VCR automatically switches to LP
mode to record the whole programme.
E.g. If there is a one hour Timer Recording in AUTO
mode to be started, and only 40 minutes tape
remaining, the VCR will record in SP for 20
minutes and switch to complete the remaining
40 minutes in LP mode.
20
Page 20
Checking a Preset Recording
You can check your preset recordings:
When you have finished presetting the VCR
If you have forgotten which programmes will be
recorded
1
- Insert the cassette. Press the TIMER button.
Press the
or
buttons to select the
"
option and then press the ❿!button or,
Press MENU on the remote control.
Result: The programming menu is displayed.
Press the OK button to select
TIMER PROGRAMMING
option.
Result: The
TIMER PROGRAMMING
displayed.
2
Press the
or
buttons to select the required
"
,
"
programme.
3
Press the ➛ or ❿ buttons to select and change any
values as required. For more details, refer to the
buttons.
previous page.
4
On completion, press MENU twice.
or
"
"
Cancelling a Preset Recording
You can cancel any programmes that are:
Incorrect
No longer required
1
- Insert the cassette. Press the TIMER button.
Press the
or
buttons to select the
"
option and then press the ❿!button or,
Press MENU on the remote control.
Result: The programming menu is displayed.
Press the OK button to select
TIMER PROGRAMMING
option.
Result: The
TIMER PROGRAMMING
displayed.
2
Select the programme to be cancelled by pressing
the
or
buttons.
"
❷!
3
Press the CLR/RST button to cancel the selected
programme.
Result: All the recording information is deleted and
the broadcast will not be recorded.
4
On completion, press MENU twice.
Playing a Cassette
This function allows you to play back any pre-
recorded cassette.
1
Switch on both the television and your VCR.
2
Insert the video cassette to be played. If the safety
tab on the cassette is intact, press
Otherwise, the cassette is played automatically.
STANDARD
When a cassette is loaded, the tape position
is optimized automatically to reduce
disturbance (Digital Auto Tracking).
When playing a cassette, if the end of the tape
is reached, the cassette is rewound
menu is
automatically. NTSC tapes can be played
back but cannot be recorded with this VCR.
3
To... Then press...
Stop the playback
Eject the cassette
Adjusting Picture Alignment Automatically
(SV-651GX/SV-455GX/SV-451GX/SV-255GX/
SV-251GX Only)
The Picture Alignment feature enables you to
optimize the tape position automatically to obtain
the best possible picture.
When noise bars or streaks appear during playback,
adjust picture alignment by pressing the A.TRK button.
Result:
The tracking bar appears.
The picture is automatically adjusted.
The tracking bar disappears when digital
auto tracking has been completed.
STANDARD
Adjusting Picture Alignment Manually
menu is
The Picture Alignment feature allows you to adjust
the alignment manually to obtain the best possible
picture.
When noise bars or streaks appear during playback,
adjust alignment manually by pressing the PROG/TRK
(" or ❷) / TRK (
or
) buttons until the picture is
clear and stable.
Result:
The tracking bar appears.
The image is adjusted.
The tracking bar disappears when you
release the button.
Intelligent Picture Control
The Intelligent Picture Control Feature allows you
to adjust the sharpness of the image automatically,
according to your own preferences.
1
During playback, press the MENU button on the
remote control.
Result: The programming menu is displayed.
❿ II
.
2
Press the corresponding
select the
USER SET
option.
3
Press the OK button to select this option.
Result: The
USER SET
4
Press the corresponding
IPC
option is selected.
5
Press the ❿!button to select the IPC (intelligent
picture control) option.
When intelligent picture control mode is
the sharpness of the image is adjusted
automatically.
(STOP).
6
To adjust the sharpness manually, press the
(EJECT).
button to turn the IPC mode
7
Press the ➛ or ❿ buttons until the picture is
displayed according to your preferences.
If you do not press a button within ten
seconds, the
PICTURE
automatically.
8
On completion, press the MENU button again.
Intelligent Picture Control (SV-651GX/
SV-455GX/SV-451GX/SV-255GX/SV-251GX Only)
The Intelligent Picture Control Feature allows you
to adjust the sharpness of the image automatically,
according to your own preferences.
1
During playback, press the IPC button on the
remote control.
2
Press the
button to turn the IPC (intelligent
picture control) option
ON
When intelligent picture control mode is
the sharpness of the image is adjusted
automatically.
3
To adjust the sharpness manually, select intelligent
picture control mode
OFF
The horizontal picture adjusting appears.
4
Press the ➛ or ❿ buttons until the picture is
displayed according to your preferences.
If you do not press a button within ten
seconds, the
PICTURE
automatically.
5
On completion, press the IPC button again.
or ➛, ❿ buttons to
,
"
❷!
menu is displayed.
or
buttons, until the
"
,
ON
OFF
.
GB
menu disappears
and
OFF
.
ON
,
.
menu disappears
21

Advertisement

   Also See for Samsung SV-251GX

   Related Manuals for Samsung SV-251GX

This manual also for:

Sv-255gx, Sv-451gx, Sv-651gx, Sv-655gx, Sv-657gx, Sv-455gx

Comments to this Manuals

Symbols: 0
Latest comments: