Programming The Remote Control For Other Components - Samsung SP-43T7HL Owner's Instructions Manual

Programming the Remote Control for Other Components

Your TV comes equipped with a universal remote control. In
addition to controlling the TV, the universal remote control can
also operate a VCR, Cable box, DVD and Set-Top Box made by
Samsung (even if your VCR, Cable box and DVD are made by
manufacturers other than Samsung).
➢
The remote control might not be compatible with all
VCRs, DVD players and Cable boxes.
1
Turn off your VCR (Cable box or DVD).
2
Press the SELECT button to switch the remote control to the VCR
(CABLE or DVD) mode.
➢
The remote control has five modes : TV, STB, VCR,
CABLE and DVD
3
Press the SET button.
4
Enter 3 digits of the VCR (Cable box or DVD) code listed on next
page for your VCR (Cable box or DVD).
Example: To enter the code "6", press 0, 0, and 6.
To enter the code "76", press 0, 7, and 6.
5
Press the POWER (
should turn on. If it turns on, your remote control is now set
correctly.
➢
If it does not turn on, repeat steps above, but try one of the
other codes listed for the brand of particular yours.
6
Once your remote control is set up, press the SELECT button any
time you want to use the remote control to operate VCR (Cable
box or DVD).
➢
◆ When your remote control is in the STB, VCR, CABLE
and DVD mode, the volume buttons still control your
television's volume.
◆ When your remote control is in the TV mode, the VCR or
DVD control buttons (rewind, stop, play/pause and fast
forword) still operate your VCR or DVD.
) button. Your VCR (Cable box or DVD)
English - 53