Using the LNA (Low Noise Amplifier) Feature
This feature is very useful in the situation that the TV is used in a
weak signal, and amplifies the TV signal in the weak signal area, but
not noise.
This feature is working only in a weak signal condition, and that is
memorized on relevant channel's additional information.
1
Press the MENU (
Result :
The main menu is displayed.
Press the ▲ or ▼ button until the Channel is selected.
2
Result :
The options available in the Channel group are
displayed.
3
Press the ENTER (
Press the ▲ or ▼ button until the LNA is selected. Press the
4
ENTER (
) button.
Select Off or On by pressing the ▲ or ▼ button. Press the
5
ENTER (
) button to confirm.
Changing the Picture Standard
You can select the type of picture which best corresponds to your
viewing requirements.
1
Press the MENU (
Result:
The main menu is displayed.
Press the ▲ or ▼ button until the Picture is selected.
2
Result :
The options available in the Picture group are
displayed.
3
Press the ENTER (
Result :
The Mode is selected.
4
Press the ENTER (
Result :
The options available are listed.
Select the required option by pressing the ▲ or ▼ button.
5
Result :
The following modes are available:
Dynamic - Standard - Movie - Custom
6
Press the ENTER (
➢
You can select these options by simply pressing
the P.MODE (
control.
) button.
) button.
) button.
) button.
) button again.
) button to confirm.
: Picture Mode) button on the remote
Channel
TV
▲ More
Fine Tune
LNA
:
On
Move
Enter
Channel
TV
▲ More
Fine Tune
LNA
:
On
Off
On
Move
Enter
Picture
TV
Dynamic
Mode
:
Off
Standard
Custom
Movie
Custom
Color Tone
:
Normal
Size
:
Normal
Scan Mode
:
Auto
Digital NR
:
On
Move
Enter
Dynamic
English - 27
√ √
√ √
Return
√ √
√ √
Return
√ √
√ √
√ √
√ √
√ √
√ √
Return