Programming The Remote Control For Other Components - Samsung SP46L5HX Owner's Instructions Manual

Programming the Remote Control for Other Components

This TV's remote control can operate VCR, CATV , DVD, or Set-top
box (STB), in addition to controlling the TV.
➣
The remote control might not be compatible with the TV
manufactured by another company.
1
Turn off your VCR, Cable box, DVD or STB.
2
Press the SELECT button. Mode is changed whenever SELECT
button is pressed. (new mode is displayed on LED screen.)
3
Press the SET button.
4
Use the numeric buttons to enter the code by manufacturer. Each
code must be three digits long.
Example: To enter the code "6", press 0, 0, and 6.
To enter the code "76", press 0, 7, and 6.
➣
See the remote control code tables to find the appropriate
code for your particular component. If more than one code
is listed, try each one separately until you find the one that
works.
5
Press the POWER (
The component you select should turn on. If it turns on, your
remote control is now set correctly.
➣
If it does not turn on, repeat steps above, but try one of the
other codes listed for the brand of particular yours.
6
Once your remote control is set up, press the SELECT button any
time you want to use the remote control to operate your VCR,
Cable box, DVD or STB.
➣
◆ When your remote control is in the VCR, CATV, DVD or
STB mode, the volume buttons still control your
television's volume.
◆ When your remote control is in the TV or CATV mode,
the VCR or DVD control buttons (PLAY, PAUSE, etc.)
still operate your VCR or DVD.
) button on the remote control.
ENG
TV
61